Transceptor SFP BlueOptics GMFIBER-SFP-500K-BO 1250 Mbit/s plateado

The BlueOptics GMFIBER-SFP-500K-BO is an SFP transceiver module designed for multimode fiber optic connections. It supports a maximum data transfer rate of 1250 Mbit/s, uses an LC duplex optical interface and is housed in a silver metal casing. With a lightweight construction of approximately 20 g and a mean time between failures (MTBF) of 1,000,000 hours, the module is intended for compact installations that require long-term availability and standardized SFP interoperability.

Advantages

This SFP transceiver offers a compact, standardized SFP interface that simplifies swapping and upgrading optics in compatible network hardware. The metal housing provides mechanical robustness and thermal stability while the low weight facilitates dense port deployments. A high MTBF figure indicates extended operational lifetime and reduced maintenance intervals for optical links.

Suitable for

Key specifications

How to use

Ensure the target device supports SFP modules and the required data rate. With power to the host device turned off or following hot-swap recommendations from the device vendor, insert the BlueOptics GMFIBER-SFP-500K-BO into an empty SFP port until it seats firmly. Connect LC duplex fiber patch cords to the module’s transmit and receive ports, observing correct polarity. After insertion, verify link status and negotiated speed in the host device management interface and confirm the physical layer operates as expected.

Recommendations

Use high-quality multimode LC duplex patch cords and maintain proper fiber polarity for optimal performance. Verify that the host hardware supports the SFP module’s optical parameters and any diagnostic functions before deployment. For critical links, perform a test run and monitor link status after installation to confirm stability.