Transceptor SFP+ BlueOptics K586N 10000 Mbit/s fibra óptica

The BlueOptics K586N SFP+ transceiver is a compact 10GBASE-SR module designed for high-speed multimode fiber networks. It supports data rates up to 10000 Mbit/s in an SFP+ form factor with LC duplex connections and uses 850 nm VCSEL optics for transmit and receive. The module is intended for installation in switches, routers, storage systems and other network devices that accept SFP+ pluggable transceivers and is lightweight for easy handling and deployment.

Advantages

The transceiver complies with MSA SFP+ form-factor conventions and is engineered for interoperability with common hardware platforms. It incorporates components selected for long service life and reliability, and supports digital diagnostic monitoring (DDM/DOM) compliant with SFF-8472 to report real-time operating parameters. The LC duplex connector and multimode fiber support enable simultaneous transmit and receive channels with stable optical performance and immunity to electromagnetic interference.

Suitable for

Key specifications

How to use

Install the BlueOptics K586N SFP+ transceiver into an available SFP+ port on a compatible network device while the device is powered down or per vendor hot-swap guidelines. Connect an LC duplex multimode fiber patch cable between transceivers or to a patch panel, ensuring correct TX/RX orientation. Verify link status through the host device interface and, if available, use DDM to monitor voltage, temperature and optical power levels. Follow the network equipment vendor’s instructions for compatibility checks and any required configuration steps.

Recommendations

Use multimode fiber patch cables rated for 10GBASE-SR and keep connector endfaces clean to maintain optical performance. Confirm DDM/DOM support on the host device to enable remote diagnostics. For best longevity and availability, operate the transceiver within the environmental limits specified by the network equipment and perform regular monitoring of optical power and temperature.