Tubo termorretráctil Cellpack 145122, 2:1, 12,7 mm, negro, 1 m

Heat shrink tubing with a 2:1 shrink ratio and a thin wall, made from cross-linked polyolefin. The tubing has an inner diameter of 12.7 mm before shrinking and 6.4 mm after shrinking, providing reliable insulation and strain relief for cables and connectors.

Advantages

Flame retardant and UV resistant, suitable for use in environments where exposure to sunlight or potential ignition sources is a concern. The tubing operates within a temperature range of -55°C to +125°C and requires a minimum shrink temperature of 90°C.

Suitable for

• Electrical insulation of splices and terminations
• Mechanical protection of wires and cables
• Bundling and colour-coding of conductors

Key specifications

• Material: Cross-linked polyolefin
• Shrink ratio: 2:1
• Inner diameter before shrink: 12.7 mm
• Inner diameter after shrink: 6.4 mm
• Wall thickness after shrink: 0.6 mm
• Length: 1 m
• Colour: Black
• Dielectric strength: >20 kV/mm
• Certifications: UL 224, CSA C22.2 No. 198.1

Recommendations

For best results, use a heat gun set above 90°C and apply heat evenly around the tubing until it conforms tightly to the substrate.