Ventilador de aire TACENS Mars Gaming MCPU-X4ARGB — ventilador ARGB de 120 mm, 4 heatpipes, TDP 220 W, PWM, soporte LGA1200

TACENS Mars Gaming MCPU-X4ARGB is a tower air cooler with a 120 mm ARGB fan and an aluminum radiator. It features four heat pipes and PWM control to deliver CPU cooling with a thermal design power (TDP) rating of 220 W. The package includes an RGB/ARGB controller powered via SATA, a mounting kit, thermal grease and a user manual. The cooler is designed for installation on desktop processors and supports LGA1200 sockets.

Advantages

The cooler combines a compact tower design with an aluminium radiator and four heat pipes to balance heat dissipation and size. A 120 mm ARGB fan with PWM provides variable speeds from 800 to 2000 RPM, offering a maximum airflow of 78 CFM and relatively low noise levels between 9 and 28 dB. The included RGB controller and cabling simplify ARGB lighting setup; the package also contains a mounting kit and thermal grease for installation.

Suitable for

• CPU cooling in desktop PCs
• Systems using LGA1200 (Socket H5) processors
• Compact tower builds where a 120 mm cooler fits
• Users who want ARGB lighting control via SATA-powered controller

Key specifications

• Type: Air cooler (tower)
• Fan size: 120 x 120 x 25 mm
• Number of fans: 1
• Fan speed: 800–2000 RPM (PWM)
• Maximum airflow: 78 CFM
• Fan noise level: 9–28 dB
• Bearing type: Hydraulic
• Maximum air pressure: 1.31 mmH2O; minimum air pressure: 0.79 mmH2O
• Number of heat pipes: 4
• Radiator material: Aluminum
• TDP: 220 W
• Fan mean time to failure (MTTF): 60,000 h
• Illumination: Multi-color ARGB, LED voltage 5 V
• LED connector type: 3-pin; fan connector: 4-pin
• Dimensions (W x D x H): 120 x 68 x 154 mm; weight: 505 g

How to use

Install the cooler onto a compatible CPU socket following the manual included in the package. Apply the supplied thermal grease to the CPU heat spreader, mount the aluminum radiator and secure it with the supplied mounting kit. Connect the 4-pin fan connector to a motherboard fan header that supports PWM for automatic speed control and connect the 3-pin ARGB LED cable to the included SATA-powered RGB controller to manage lighting. Ensure the cooler fits inside your case dimensions before installation.

Recommendations

For optimal performance, use a PWM-capable motherboard fan header to allow the fan to adjust speed according to CPU load, periodically clean dust from the radiator and fan, and verify clearance around the socket area to avoid contact with RAM or other components.