Ventilador de caja para PC MSI MAG F120 ARGB x3 — 120 mm, 1300 rpm, rodamiento hidráulico, negro

The MSI MAG F120 ARGB x3 is a set of three 120 mm case fans designed for desktop PC chassis ventilation. Each fan offers ARGB lighting compatible with MSI Mystic Light, hydraulic bearings for reduced friction and longer life, and a maximum rotational speed of up to 1300 RPM. These fans deliver a balanced combination of airflow and static pressure suitable for general chassis cooling, intake or exhaust locations and support for air-cooled CPU and GPU configurations.

Advantages

ARGB lighting with 16.8 million colors can be controlled through MSI Mystic Light, allowing synchronized lighting effects across compatible components. Hydraulic bearings lower operational noise and extend service life compared with basic sleeve bearings. Anti-noise pads on the four corners of each fan reduce vibration and rattling when mounted to the case. The included 1-to-3 splitter cable simplifies powering multiple fans from a single header.

Suitable for

• Case intake and exhaust in mid-tower and full-tower desktop builds
• Supplementary cooling for air-cooled CPU towers
• Enhancing airflow around GPU and VRM zones
• Systems where synchronized ARGB lighting is required

Key specifications

• Fan diameter: 120 mm
• Maximum speed: 1300 RPM
• Maximum static pressure: 1 mmH2O
• Airflow: approximately 51 CFM
• Noise level: approximately 26.9 dB
• Bearing type: hydraulic bearing
• Colour: black with ARGB lighting
• Set quantity: 3 fans; includes 1× 1-to-3 splitter cable

How to use

Install each fan into the desired case mounting points using the supplied mounting screws or compatible screws for 120 mm fans. Connect the fans to the motherboard or controller using the provided splitter cable and ensure the ARGB connectors are attached to a compatible ARGB header or controller for lighting control. Configure fan curves and ARGB effects in the motherboard BIOS or MSI Mystic Light software to match system temperature and visual preferences. Verify correct airflow direction before finalizing cable routing and close the case.

Recommendations

Position at least one fan as intake at the front or bottom and one as exhaust at the rear or top for balanced airflow. Use motherboard fan control or a dedicated fan controller to set appropriate RPM profiles to balance cooling performance and noise. Periodically clean dust from blades and anti-noise pads to maintain airflow and prolong bearing life. When synchronizing lighting, confirm that the motherboard or controller supports ARGB addressable 3-pin headers used by MSI Mystic Light.