Yikong TB8 YK7081 1/8 4WD Desert Truck Red

The Yikong TB8 Trail Breaker is a 1/8 scale 4WD desert truck with a painted off-road SUV body, roll cage and LED lighting. Its 3674 brushless motor (2800 kV) and waterproof 120 A ESC deliver 70+ km/h on 3S or 85+ km/h on 4S. It has independent suspension, aluminium oil-filled shocks and a 2.4 GHz radio with gyro. A LiPo battery, charger and transmitter batteries are required separately.

Key features

• Painted polycarbonate off-road SUV body with roll cage, LED headlights and roof spotlights
• Light, impact-resistant composite chassis with aluminium motor mount
• Reinforced lower control arms, aluminium arm mounts front and rear, and sway bars on both axles
• Factory-tuned big-bore aluminium oil-filled shocks
• Telescopic driveshafts front and rear, dog bone centre shaft, steel differential gears, and bearing-supported drivetrain and steering
• Two battery compartments (175 × 49 mm); steel gears

Specifications

• Scale: 1:8
• Drivetrain: 4WD, shaft driven
• Motor: 3674 Brushless Motor, 2800 kV
• ESC: WP-10BL120 – 120 A Waterproof Brushless ESC (3S/4S)
• Steering Servo: 30KG High-Torque Servo with metal gears, waterproof
• Radio System: 2.4 GHz radio with gyro
• Top Speed: 3S: 70+ km/h / 4S: 85+ km/h
• Chassis: Composite chassis with aluminium motor mount
• Suspension: Four-wheel independent suspension, sway bars front & rear
• Shock Absorbers: Big-bore aluminium oil-filled shocks
• Driveshafts: Telescopic driveshafts front/rear, dog bone centre shaft
• Wheel Hexes: 17 mm hex
• Wheels/Tyres: 126 × 45 mm
• Battery: 3S or 4S LiPo, XT60 (not included)
• Battery Compartment: 2 × 175 × 49 mm
• Dimensions (L × W × H): approx. 565 × 325 × 250 mm
• Wheelbase: 388 mm
• Weight: approx. 4.6 kg
• Body: Painted polycarbonate body with roll cage, LED headlights & roof spotlights
• Colour Options: Yellow/Blue, Red/Grey, Blue/Sand Yellow
• In the box: 1× pre-assembled YK7081 TB8 1/8 scale 4WD desert truck (RTR), painted body; 1× 2.4 GHz transmitter with gyro; 1× manual
• Notes: Still required: 3S or 4S LiPo battery with XT60 connector, suitable charger and 4 × AA batteries for the transmitter

In the box: 1× Pre-assembled YK7081 TB8 1/8 scale 4WD desert truck (RTR), painted body; 1× 2.4 GHz transmitter with gyro; 1× Manual. Still required: 3S or 4S LiPo battery with XT60 connector, suitable charger and 4 × AA batteries for the transmitter.