ACT 7 m cable de red de fibra óptica LSZH multimodo 50/125 OM4 dúplex con conectores LC

The ACT 7 meter LSZH Multimode 50/125 OM4 duplex LC connectors fiber patch cable provides reliable high-speed data transmission for network and data center environments. Constructed with OM4 multimode fiber (50/125 µm) and LSZH jacket material, this 7 m duplex cable supports full-duplex links using LC connectors and is suitable for high-bandwidth applications where low-smoke, zero-halogen safety is required. Each cable is delivered with a 100% inspected end-face and an individual test report for insertion loss (IL) and return loss (RL).

Advantages

The cable uses Grade A‑m fiber with UPC polish and laser precision cleaving to ensure consistent optical performance. Individual IL and RL test reports verify link quality, while LSZH construction reduces toxic smoke and halogen emission in case of fire. Duplex LC connectorisation and OM4 multimode specifications provide compatibility with common enterprise and data center equipment.

Suitable for

• Data center uplinks and interconnects
• High-bandwidth campus and enterprise networks
• Short‑reach multimode links (fiber runs up to several hundred meters depending on equipment)
• Environments requiring low-smoke zero-halogen cabling

Key specifications

• Length: 7 m
• Fiber type: Multimode OM4, 50/125 µm
• Connectors: Duplex LC — UPC polish
• Jacket: LSZH (Low Smoke Zero Halogen)
• Quality control: Individual IL and RL test report; 100% end-face inspection
• Manufacture details: Grade A-m fiber; laser precision cleaving

How to use

Inspect connector end-faces before installation and clean if necessary. Connect the duplex LC connectors to matching LC ports on network devices or patch panels, ensuring correct polarity for full duplex operation. Route the cable following standard cabling practices, avoiding sharp bends and mechanical stress. Use appropriate cable management to maintain bend radius and to prevent strain on connectors during and after installation.

Recommendations

For optimal performance, store and handle the cable in a clean environment, use fiber‑safe cleaning tools on connector end-faces, and verify link performance after installation using the provided IL and RL test report. Follow equipment vendor guidelines for multimode OM4 link budgets and maximum supported distances.