ACT Cable de alimentación C14 IEC Lock+ Dual Locking - C15 IEC Lock+ blanco 3 m, PC3879

ACT Powercord PC3879 is a 3 m white locking power cable with a C14 Dual Locking IEC Lock+ plug on the PDU side and a C15 IEC Lock+ connector on the equipment side. Rated for 250 V and 10 A, the cable features a high-temperature C15 connector (up to 120°C) and a universal locking mechanism that secures the connection without requiring tools or a locking PDU.

Advantages

The dual-locking design secures the cable at both ends and the C14 locks at the top and side for extra protection against accidental disconnection. The universal IEC Lock+ mechanism is compatible with major PDU brands and reduces the risk of downtime and equipment damage. Available in identifiable colors, the cable is practical for rack and data centre environments.

Suitable for

• Servers and rack-mounted equipment
• Uninterruptible power supplies (UPS)
• Network switches, routers and other critical network hardware
• Power distribution units (PDUs) where secure retention is required

When it may not be suitable

This power cable is not suitable for installations that require higher current or voltage than 10 A / 250 V. It also should not be used where a different connector type is required (for example C13/C14 or other proprietary connectors).

Key specifications

• Cable length: 3 m
• Rated voltage and current: 250 V, 10 A
• Connectors: IEC C14 Dual Locking (male) to IEC C15 Lock+ (female)
• High-temperature resistance: C15 connector up to 120°C
• Conductor cross-section: 1 mm²
• Color: white

How to use

Insert the C15 IEC Lock+ connector into the equipment inlet and the C14 Dual Locking IEC Lock+ plug into the PDU or power source. Push until the locking mechanism clicks; the C14 locks at the top and side to prevent accidental release. No tools are required to engage or disengage the locks—press the release tabs on the connectors to remove the cable.

What to consider before purchase

• Verify the equipment and PDU use IEC C15 (equipment) and C14 (PDU) connectors.
• Confirm that 250 V / 10 A and 1 mm² conductor size meet your power requirements.
• Consider cable length (3 m) and routing requirements in racks or cabinets.

Recommendations

Use this ACT C14 Lock+ to C15 Lock+ 3 m cable for critical installations where accidental disconnection must be prevented. Keep connectors free of dust and inspect the locking mechanism periodically to ensure secure retention.