ACT Rosa 7 m LSZH U/UTP CAT6 cable de parcheo Slimline para centro de datos con protección de lengüeta y conectores RJ45

ACT Pink 7 meter LSZH U/UTP CAT6 datacenter slimline patch cable with snagless RJ45 connectors is a slim-diameter (3.8 mm) Cat6 patch cord designed for data center and network cabinet use. Compared with regular CAT6 patch cords (approx. 5.9 mm), the reduced diameter and smaller bending radius improve cable routing and airflow in server racks. The cable uses U/UTP construction and gold-plated RJ45 contacts; its LSZH jacket reduces harmful smoke in case of fire. The cable length is 7 m and it is finished in pink for easy identification.

Advantages

The slimline design reduces occupied space and allows tighter bends while maintaining Cat6 performance within the standard limits, improving airflow and cable management in dense rack environments. Snagless RJ45 connectors protect the plug latch during installation. The LSZH jacket minimizes smoke and toxic emissions. Using 28 AWG conductors is possible for slim cables, but results in higher attenuation at higher frequencies compared with 22–26 AWG.

Suitable for

• Data centre rack patching and horizontal cabling
• Network cabinets where space and airflow are critical
• Environments requiring LSZH jackets (reduced smoke)
• Colour-coded cabling and equipment identification

Key specifications

• Product: ACT Pink LSZH U/UTP CAT6 slimline patch cable
• Length: 7 m
• Connectors: RJ-45 to RJ-45, snagless
• Cable diameter: approx. 3.8 mm (slimline)
• Shielding: U/UTP (unshielded pairs, overall unshielded)
• Material: LSZH jacket, gold-plated contacts
• Brand/MPN/EAN: ACT / DC9407 / 8716065509519

How to use

Route the 7 m slimline CAT6 cable between patch panels, switches and servers as required, avoiding excessively tight bends beyond the cable's specified bending radius. Insert RJ45 plugs fully into ports until the latch clicks to ensure a secure connection. For best performance, keep cable lengths within standard channel limits and avoid running parallel to high-voltage power lines to reduce interference.

Recommendations

For PoE deployments, ACT advises bundling no more than 24 slimline cables together to limit temperature rise; this helps keep the center cable's temperature increase under the ANSI TSB-184-A guideline of less than 15 °C above ambient. Be aware that using thinner (28 AWG) conductors increases attenuation at higher frequencies compared with thicker 22–26 AWG wires.