Adaptador de cable de vídeo ROLINE 14.01.3474 30 m HDMI Type-A USB Type-C negro

The ROLINE 14.01.3474 30 m HDMI Type A to USB Type-C video cable adapter is a 30 metre black connection cable designed to link devices with HDMI Type A outputs to displays or source equipment using a USB Type-C interface. Weighing approximately 0.8 kg, this adapter cable provides a single-cable solution for transmitting video signals across a long run where device and display ports differ.

Advantages

This cable adapter delivers a direct physical connection between an HDMI Type A port and a USB Type-C port without the need for intermediate converters. Its 30 m length enables flexible placement of source and display equipment in larger rooms and temporary installations. The black outer jacket offers a neutral appearance that fits professional and home AV setups while the relatively low weight makes it manageable for installation and routing.

Suitable for

• Connecting HDMI Type A source devices to USB Type-C monitors or capture devices where cable length up to 30 m is required
• Conference rooms, classrooms, presentation setups and event staging
• AV installations where a long, single cable run is preferred to multiple adapters

Key specifications

• Cable length: 30 m
• Connector 1: HDMI Type A (Standard)
• Connector 2: USB Type-C
• Product colour: Black
• Weight: 0.8 kg

How to use

Connect the HDMI Type A end to the HDMI output of the source device and the USB Type-C end to the display or device accepting USB Type-C video input. Ensure both devices are powered and set to the correct input/output modes. Route the cable along the planned path, avoiding sharp bends and sources of interference; secure the cable as needed to prevent strain on connectors. If the target device requires a specific USB-C alternate mode (such as DisplayPort Alt Mode), confirm that the device supports video over USB-C before connection.

Recommendations

For reliable performance over the full 30 m length, avoid running the cable in parallel with high-power electrical lines and keep connector ends free from dust and moisture. Verify compatibility of connected devices for USB Type-C video input and test the signal at the required resolution and refresh rate prior to final installation.