ADATA Premier módulo de memoria 8 GB 1 x 8 GB DDR3L 204-Pin SO-DIMM

ADATA Premier Series DDR3L 8GB 1600MHz SO-DIMM (204-pin) is a single-module laptop memory designed to increase available RAM where motherboard slots are limited. Operating at 1.35 V with a data rate of 1600 MHz (PC3L-12800) and CAS latency 11, this 8 GB module provides higher density per slot to help maximize system performance in notebooks and small-form-factor systems.

Advantages

The ADATA DDR3L 8GB 1600MHz module follows JEDEC and RoHS standards, ensuring broad compatibility and environmentally sound production. Its 1.35 V low-voltage design reduces power consumption compared with standard DDR3 modules while delivering up to 12.8 GB/s theoretical bandwidth. The single 8 GB density makes it possible to expand memory capacity even when only a few SO-DIMM slots are available. ADATA provides lifetime warranty and support for this Premier Series memory.

Suitable for

• Upgrading laptop memory to 8 GB where only one or two SO-DIMM slots exist
• Small form factor PCs and mini-PCs using 204-pin SO-DIMM modules
• Everyday multitasking, office work and light content creation on systems supporting DDR3L

Key specifications

• Capacity: 8 GB
• Type: DDR3L (low voltage)
• Speed: 1600 MHz (PC3L-12800)
• CAS Latency: CL11
• Form factor: 204-pin SO-DIMM
• Voltage: 1.35 V
• Color: Green
• Standards: JEDEC, RoHS
• Manufacturer part number (MPN): ADDS1600W8G11-S?VISION

How to use

Power off the laptop or mini-PC and disconnect all power sources. Open the memory compartment according to the device manufacturer’s instructions. Remove existing SO-DIMM modules if necessary and align the ADATA module with the 204-pin slot notch. Insert at an angle and press down until the module clicks into place and the retention clips lock. Reassemble the device, reconnect power, and verify the system recognizes the new 8 GB module in the BIOS or operating system memory settings.

Recommendations

Confirm that your laptop or mini-PC supports DDR3L 1.35 V SO-DIMM modules and that the system firmware supports the total memory configuration before installation. For dual-channel operation, install identical modules in paired slots if supported by the motherboard. Avoid electrostatic discharge by grounding yourself before handling the memory module.