Anycubic filamento PETG Forest Green 1,75 mm 1 kg

PETG filament in forest green delivers exceptional durability and ease of printing, making it a top choice for functional parts and prototypes. With a diameter of 1.75 mm and a tight tolerance of ±0.02 mm, it ensures consistent extrusion and reliable layer adhesion. The filament is vacuum-sealed with desiccant to maintain dryness, and its low warping and shrinkage characteristics allow for printing on open-frame printers without an enclosure. It offers high tensile strength (≥50 MPa) and excellent elongation at break (≥200%), resulting in parts that are tough and impact-resistant. The recommended printing temperature range is 220–250 °C, with a bed temperature of 70–90 °C, providing flexibility across various FDM printers.

Advantages

PETG combines the ease of PLA with the strength and temperature resistance closer to ABS. It is less brittle than PLA and does not require an enclosure like ABS, reducing warping and odor. The forest green color adds a professional look to functional prototypes, jigs, fixtures, and end-use parts. The filament is tangle-free and bubble-free, ensuring smooth feeding and consistent prints. Its low odor and low warping make it suitable for home and office environments.

Suitable for

• Functional prototypes and mechanical parts
• Outdoor applications due to UV and moisture resistance
• Snap-fit components and living hinges
• Tool holders, brackets, and enclosures
• Educational and hobbyist projects requiring durable prints

Key specifications

• Material: PETG (Polyethylene Terephthalate Glycol)
• Color: Forest Green
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.02 mm
• Net Weight: 1 kg
• Recommended Print Temperature: 220–250 °C
• Recommended Bed Temperature: 70–90 °C
• Density: 1.27 g/cm³
• Tensile Strength: ≥50 MPa
• Elongation at Break: ≥200%
• Heat Deflection Temperature (HDT): 70 °C at 0.45 MPa
• Spool Dimensions: Outer Diameter 200 mm, Hub Diameter 56 mm, Width 65 mm
• Packaging: Vacuum-sealed with desiccant

Recommendations

For best results, dry the filament before use if exposed to humidity, and store in a sealed container with desiccant. Use a heated bed at 70–90 °C and apply a suitable adhesive like glue stick or PEI sheet for optimal adhesion. Print at 220–250 °C with a cooling fan set to low or off for stronger layer bonding. This filament is compatible with most FDM 3D printers that accept 1.75 mm filament.