BlueOptics JNP-SFP-10G-BX10U-20-BO Módulo transceptor de red fibra óptica 10000 Mbit/s SFP+

The BlueOptics JNP-SFP-10G-BX10U-20-BO is a fiber optic SFP+ transceiver module designed for single-mode optical links with a maximum data transfer rate of 10,000 Mbit/s. It implements the 10GBASE-BX-U transmission concept with an LC simplex connector and supports simultaneous transmit and receive on a single fiber using separate wavelengths. The module is compact, lightweight (0.02 kg) and complies with CE, RoHS and FCC standards, making it suitable for integration into switches, routers and other network devices that accept SFP+ modules.

Advantages

The module offers 10 Gbit/s optical connectivity in an MSA-compliant SFP+ form factor, enabling high-speed links over single-mode fiber. Its compact silver housing and low weight simplify installation and reduce mechanical load on ports. Built to industry standards and tested for compatibility, it supports digital diagnostics (DDM/DOM) where supported by host equipment, providing real-time monitoring of operating parameters. Conformance to CE, RoHS and FCC ensures regulatory compliance for many deployment environments.

Suitable for

Key specifications

How to use

Install the transceiver into a compatible SFP+ port on the host device until it latches; ensure the host device supports 10GBASE-BX-U and the specific DDM/DOM features you intend to use. Connect an LC simplex single-mode patch cord between transceivers or to a patch panel, observing proper fiber handling to avoid bending or contamination. Configure link speed and protocols on the network devices as required (Ethernet, Fibre Channel over Ethernet, or SDH/SONET where applicable) and verify link status via the host device management interface or DDM readings if available.

Recommendations

For reliable performance, use single-mode LC simplex fiber of appropriate attenuation for the target link distance, keep connectors clean, and confirm that the host hardware and firmware accept third-party SFP+ modules and support DDM if diagnostic monitoring is needed. When deploying in production, validate links in a lab or pilot environment prior to widespread roll-out.