Cable Brennenstuhl H07RN-F 3G1.5 negro 40 m

The Brennenstuhl H07RN-F 3G1.5 Black 40 m is a flexible rubber-sheathed power cable designed for demanding indoor and outdoor power distribution tasks. With a 40 metre length and robust black exterior, the cable provides a reliable connection for portable equipment, temporary power lines and installations where mechanical stress, sunlight exposure and contact with oils or mild chemicals are possible.

Advantages

This H07RN-F cable combines elasticity and resistance: the rubber insulation maintains flexibility at varying temperatures while offering enhanced mechanical durability. The outer sheath is designed to withstand UV exposure and provides additional protection against abrasion and common site chemicals. Its three-core 1.5 mm² conductor configuration supports safe distribution of single-phase power to tools and small equipment over a longer reach without frequent coupling.

Suitable for

• Temporary power supply on construction sites
• Outdoor events and festivals
• Workshops and garage power outlets
• Portable lighting and equipment extension

Key specifications

• Cable type: H07RN-F rubber-insulated flexible cable
• Conductor configuration: 3 cores
• Conductor cross-section: 1.5 mm²
• Length: 40 m
• Colour: Black
• Suitable environments: indoor and outdoor use

How to use

Unroll the cable fully before powering equipment to reduce heat buildup and avoid localized stress. Connect the cable to compatible plugs or sockets rated for the conductor size and intended load, following local electrical codes. Inspect the cable for visible damage before each use and route it to minimize trip hazards and mechanical strain; avoid sharp bends near connection points. When used outdoors, keep connections elevated and protected from direct water exposure.

Recommendations

Use the Brennenstuhl H07RN-F 3G1.5 Black 40 m for portable and temporary power needs where flexibility and resistance are required. Ensure the connected load does not exceed the permissible current for 1.5 mm² conductors according to national regulations, and perform regular visual inspections for cuts, deep abrasions or aging of the sheath. Store the cable coiled in a dry place away from direct sunlight when not in use.