Cable coaxial ShiverPeaks BS80108-128 10 m conector F blanco

The ShiverPeaks BS80108-128 10 m coaxial cable with F-type connectors on both ends is designed for reliable signal transmission between consumer AV devices. With a 10-metre length and white outer jacket, this cable connects televisions, satellite receivers, set-top boxes and other equipment that use standard F-type coaxial connections while keeping signal degradation and interference to a minimum.

Advantages

This coaxial cable provides a stable RF connection thanks to its standardized F-type terminations and a construction that reduces signal loss over the 10 m run. The neutral white jacket offers a discreet appearance suitable for wall runs and visible installations. The cable is compatible with common home and professional audiovisual devices that accept F-type connectors and is easy to install without special tools beyond a proper connector wrench if tightening is required.

Suitable for

• Connecting televisions to antenna or cable TV outlets
• Linking satellite receivers to LNBs or multiswitches
• Connecting set-top boxes and digital tuners
• Temporary or permanent installations where a 10 m length is required

Key specifications

• Cable type: coaxial with F-type connectors on both ends
• Length: 10 metres
• Outer jacket colour: white
• Intended signals: RF/cable/satellite video and digital TV signals
• Typical use: indoor installations (wall runs, behind equipment)

How to use

Route the cable from the signal source to the target device avoiding sharp bends and tight kinks. Connect each F-type connector by aligning and screwing it onto the corresponding threaded socket until finger-tight, then finish with a small turn using an appropriate tool if necessary to ensure a secure connection. Ensure the connections at both ends are clean and free from corrosion or debris before attaching. For permanent installations, secure the cable with clips or cable ties at intervals to prevent strain on the connectors.

Recommendations

For best signal quality, avoid running the coaxial cable parallel to mains power lines for extended lengths and keep the cable away from strong sources of electromagnetic interference. If the installation is outdoors or exposed to moisture, use a purpose-made outdoor-rated coaxial cable or appropriate protective conduits to prevent water ingress and connector corrosion.