Cable convertidor DisplayPort a HDMI InLine 17187I 4K/60Hz negro 0,3 m

The InLine DisplayPort to HDMI converter cable (model 17187I) connects a DisplayPort output to an HDMI input, enabling video transmission from devices with DisplayPort interfaces to HDMI displays. It supports up to 4K resolution at 60 Hz and has a compact 0.3 m length, with a DisplayPort connector on one end and a standard HDMI Type A connector on the other. The cable is black and intended for short-distance connections between source devices and monitors, TVs or beamers.

Advantages

This converter cable supports 4K/60Hz video, provides a simple one-cable solution without separate adapters, and is suitable for tight setups due to its 0.3 m length. The fixed cable design reduces the number of separate components and its standard HDMI Type A connector ensures compatibility with most HDMI displays.

Suitable for

• Connecting a computer or laptop DisplayPort output to an HDMI monitor or TV
• Presentations with beamers (projectors) that accept HDMI
• Gaming or streaming setups where source and display are in close proximity

Key specifications

• Model: InLine 17187I
• Resolution support: up to 4K (3840×2160) at 60 Hz
• Length: 0.3 m
• Connector 1: DisplayPort
• Connector 2: HDMI Type A (Standard)
• Colour: Black
• Brand: InLine
• MPN: 17187I
• EAN: 4043718278015

How to use

Plug the DisplayPort end into the DisplayPort output of your source device (for example a PC or laptop) and connect the HDMI Type A end to the HDMI input of the display device (monitor, TV or projector). Ensure both devices are powered on and select the correct input on the display. Configure the output resolution on the source device to the desired setting, up to 4K at 60 Hz if supported.

Recommendations

For reliable 4K/60Hz output, use this cable for short-distance connections (recommended within the stated 0.3 m). If longer runs or active signal conversion are required, consider a longer cable or an active converter solution.