Cable de alimentación ACT C14 a C15 acodado IEC60320 negro 2 m H05RN-F 10 A 250 V

ACT power cord with IEC C14 inlet and right-angled IEC C15 outlet, 2 m length. The cable uses flexible H05RN-F conductor and is rated for 250 V and 10 A. The C15 outlet is a high-temperature connector designed to withstand temperatures up to 120°C, making this cord suitable for powering servers, network switches, UPS units and other IT equipment that require a C15 connection. The jacket is black for standard data center and office environments.

Advantages

The right-angled C15 connector reduces strain where space is limited and helps maintain tidy cable runs. The H05RN-F construction provides flexibility and durability for typical data center and office use. High-temperature resistance at the C15 outlet ensures safe connection to equipment that produces elevated heat at the inlet.

Suitable for

When it may not be suitable

This cable is specified for a maximum of 250 V and 10 A; it is not suitable for higher-voltage or higher-current applications. It is intended for devices that accept an IEC C15 inlet; devices with other inlet types (for example C13-only inlets or country-specific plugs) will require a different cord.

Key specifications

How to use

Insert the IEC C14 end into a compatible power source such as a PDU or UPS outlet, and connect the right-angled IEC C15 outlet to the device inlet. Ensure the connectors are fully seated and that the cable is routed to avoid sharp bends or pinch points. Verify the device’s inlet type and current/voltage requirements before connecting.

What to consider before purchase

Recommendations

Route the cable to avoid excessive bending at the angled connector and secure it to prevent strain on the outlet; inspect periodically for wear and replace if the insulation or connector shows damage.