Cable de alimentación ACT C20–C21 IEC60320 negro 2,5 m, 16 A, 250 V

ACT power cord with IEC60320 C20 (male) to C21 (female) connectors, 2.5 m length. Rated for 16 A and 250 V, this black cable is designed to supply reliable power to high-power IT equipment such as servers, UPS units and network devices that accept C20/C21 inlets. The C21 connector is specified as high temperature resistant up to 155°C.

Advantages

The cable supports up to 16 A at 250 V, suitable for high-power devices in data center and office environments. With a 2.5 m length and 2.5 mm² conductor cross-section it provides a balance between reach and current capacity. The C21 female connector is rated for high temperatures (up to 155°C), improving safety under demanding operating conditions.

Suitable for

When it may not be suitable

Not suitable for appliances or equipment that require other mains plug types or different IEC connectors (for example C13/C14, C5/C7). It should not be used where higher current or voltage ratings are required than 16 A / 250 V, or where local regulations demand specific cable approvals not listed here.

Key specifications

How to use

Insert the C20 (male) end into the power outlet or PDU with a matching C20 receptacle and connect the C21 (female) end to the device inlet. Ensure connections are secure and that the device’s power requirements do not exceed the cable’s 16 A / 250 V rating. Route the cable to avoid sharp bends, pinch points and heat sources, and inspect the cable and connectors for damage before each use.

What to consider before purchase

Recommendations

For safe, long-term use in racks and data centers, use cable management to prevent strain on connectors, avoid running the cable near heat-emitting equipment, and perform regular visual inspections for wear or damage.