Raíl para rack EFB PRO-SGL10 – acero 25 mm × 750 mm × 55 mm, plateado, pack de 2

The EFB PRO-SGL10 rack rail set provides two steel mounting rails designed for use in 19" server racks. Each rail measures 25 mm wide, 750 mm deep and 55 mm high, and comes with a silver finish. The set is intended to support, align and secure rack-mounted devices such as servers, switches and network appliances, simplifying installation and ensuring a stable, load-bearing housing inside standard rack enclosures.

Advantages

These steel rails deliver reliable mechanical support and precise alignment for 19" equipment. The compact 25 mm width and solid steel construction allow for discreet yet strong mounting points, while the 750 mm depth accommodates a wide range of device chassis depths. The silver finish provides basic corrosion resistance and a neutral appearance that integrates with typical rack interiors. Supplied as a pair, the rails enable installation on both sides of rack equipment without the need to purchase extra components.

Suitable for

• Mounting 19" rack servers and blade chassis requiring side support
• Fixing network switches, patch panels and power distribution units
• Supporting storage devices and small rack-mounted appliances
• Retrofit and new rack installations in server rooms and data closets

Key specifications

• Material: steel
• Colour: silver
• Width: 25 mm
• Depth: 750 mm
• Height: 55 mm
• Package quantity: 2 rails

How to use

Install the rails inside a compatible 19" rack by aligning each rail with the rack's mounting holes at the desired U positions. Secure the rails using appropriate rack screws or cage nuts (not included) matching your rack type. Position equipment so that its mounting ears or brackets rest on the rails, then fasten the device to the rack front posts as required. Verify alignment and load distribution across both rails before leaving equipment unattended.

Recommendations

Use appropriate mounting hardware compatible with your rack (screws, cage nuts or clips) and check the weight and mounting requirements of your equipment. For heavy servers or unbalanced loads, ensure additional support or reinforced mounting options are used. Periodically inspect the rails and fastenings for corrosion or loosening and tighten as needed.