Cable de alimentación helos 310981 — conector CEE 7/7 en ángulo 90° a IEC C13, 0,5 m

helos 310981 is a 0.5 m power cable with a 90° CEE 7/7 (Schuko/Euro) plug to an IEC C13 connector, intended for connecting mains-powered IT and office equipment to standard wall outlets. The compact right-angle mains plug is designed to sit flat against a wall or behind furniture, while the IEC C13 connector matches power inlets on computers, monitors, printers and many peripherals. The short length reduces excess cable clutter and is suitable where devices are positioned close to power sources.

Advantages

The 90° CEE 7/7 plug minimizes rear clearance requirements and reduces mechanical strain on the cable and device inlet. A 0.5 m length keeps the routing tidy and prevents loose loops of cable. The IEC C13 connector is a widely used standard for reliable power delivery to IT equipment. The construction provides a straightforward, space-saving solution for confined installations.

Suitable for

• Desktop computers and workstations located near power sockets
• Monitors, printers and small office devices with IEC C13 inlets
• Racks or cupboards where rear clearance behind devices is limited
• Temporary setups or trade shows where short, tidy cabling is preferred

Key specifications

• Cable length: 0.5 m
• Plug type (mains end): 90° CEE 7/7 (Schuko/Euro)
• Device connector: IEC C13
• Typical application: power connection for IT and office equipment
• Design focus: right-angle mains plug, space-saving routing

How to use

Insert the 90° CEE 7/7 plug firmly into a compatible mains outlet, ensuring the cable exit direction aligns with furniture or wall clearance. Connect the IEC C13 end to the device’s power inlet until it seats securely. Do not force connections; verify compatibility of socket and inlet before powering the device. Route the cable to avoid sharp bends, pinch points and contact with heat sources. When disconnecting, pull the plug or connector body rather than the cable to avoid strain.

Recommendations

Use this short right-angle power cable in setups where rear space is constrained and a tidy, reliable mains connection is required. Confirm the device accepts an IEC C13 inlet and that the mains outlet supports CEE 7/7 plugs. Regularly inspect the cable and connectors for signs of wear or damage and replace if any deterioration is found.