Cable de alimentación interno DeLOCK 83433 0,3 m PCI-E 6+2 pines 6 pines

The DeLOCK 83433 internal power cable is a 0.3 m cable with PCI-E connectors (6+2 pin and 6-pin) intended to supply power to PCI Express cards with higher power demands, such as graphics cards. The 6+2 pin connector can be used as an 8-pin or as a 6-pin connector by removing two pins, allowing compatibility with cards that require either connector type. The cable is available in black, white and yellow color accents.

Advantages

This internal power cable provides a short, reliable connection for PCI-E devices and supports flexible connector configurations thanks to the detachable 2-pin section on the 6+2 connector. At 0.3 m length it reduces cable clutter inside the case while delivering stable power to high-consumption expansion cards. The cable is compatible with standard PCI-E power sockets and manufactured to match typical internal PC wiring.

Suitable for

• Powering graphics cards with 6-pin PCIe connectors
• Supplying power to PCIe cards that require an 8-pin connector when using the 6+2 configuration
• Short internal cable runs in compact or standard PC cases

Key specifications

• Cable length: 0.3 m
• Connector 1: PCI-E (6+2 pin)
• Connector 2: PCI-E (6-pin)
• Product colour: Black, White, Yellow
• Brand: DELOCK, MPN/EAN: 4043619834334

How to use

Connect the PCI-E (6+2 pin) end to the power supply or to an available PCI-E power output, and plug the PCI-E 6-pin connector into the target PCI Express card. If the card requires an 8-pin connector, attach the additional 2-pin section to the 6+2 connector before connecting. Ensure connectors are fully seated and the system is powered off while making connections.

Recommendations

Use this cable only with compatible power supply outputs and PCI-E sockets. Verify connector types and power requirements of the target card before use. Avoid excessive bending near the connectors and ensure good airflow and secure cable routing inside the chassis.