Cable de alimentación Schuko IEC320 C19 16A 3,0 m ROLINE

Power Cord Schuko IEC320 C19 16A 3.0 m ROLINE is a 3.0 m angled connection cable with a CEE7/7 (Schuko) plug and an IEC320 C19 female coupler. The cable uses H05VV-F 3G1.5 conductors (3 x 1.5 mm²) and is rated for 250 VAC and 16 A. It is commonly used with UPS systems from approximately 3000 VA and for connecting blade servers and other rack equipment that require a C19 inlet.

Advantages

The cable provides a compact, angled C19 coupler that helps save space in dense rack installations. Constructed with H05VV-F 3G1.5 conductors, it supports the specified 16 A current at 250 V and comes in a standard black colour for unobtrusive cable management. The 3.0 m length offers flexibility for positioning equipment relative to power sources.

Suitable for

• Connecting UPS units (typically from around 3000 VA) to mains power
• Powering blade servers and rackmount equipment with C19 inlets
• Server rooms and data centre racks requiring angled C19 connections

Key specifications

• Cable length: 3.0 m
• Connector 1: CEE7/7 (Schuko)
• Connector 2: IEC320 C19 female (angled)
• Cable type: H05VV-F 3G1.5 (3 x 1.5 mm²)
• Rated: 250 VAC / 16 A
• Colour: Black
• Brand: ROLINE, MPN: 19.08.1553, EAN: 7611990197194

How to use

Insert the CEE7/7 Schuko plug into a compatible mains outlet and connect the IEC320 C19 female coupler to the device's C19 inlet. Ensure the cable is routed to avoid sharp bends and mechanical stress, and that connections are fully seated. Verify the device and circuit breaker ratings match the cable's 16 A / 250 V specification before powering on.

Recommendations

Use this cable in dry, indoor environments with adequate ventilation. Do not exceed the rated current and inspect the cable regularly for signs of wear or damage; replace if any insulation or connector damage is observed.