Cable de audio XLR conector hembra de 3 polos a conector macho jack de 6,35 mm 0,9 m Omnitronic 3022516L

The Omnitronic 3022516L audio cable is a 0.9 m interconnection lead with a female XLR (3-pin) connector on one end and a male 6.35 mm (1/4") jack on the other. Designed for signal transfer between balanced microphone outputs or mixing desk sends and instrument or amplifier inputs, this black cable provides a compact solution for short-distance audio routing in studios, rehearsal spaces and live setups.

Advantages

The cable combines a professional female XLR connector and a sturdy 6.35 mm male jack to support reliable analog audio transmission. Its 0.9 m length minimizes excess cable on stage or in the studio, reducing signal degradation and tangling. The robust outer jacket and solid connector housings deliver durability for frequent handling and regular setup changes.

Suitable for

Key specifications

How to use

Insert the female XLR connector onto the male XLR output of the microphone or balanced line source until it locks. Plug the 6.35 mm male jack into the instrument input, amplifier, or line-level input on a mixing desk. For best results, ensure both connected devices are powered off when making connections and power on devices after the cable is in place. When using a microphone with a balanced output, confirm the destination input supports the expected signal type to avoid improper wiring or unbalanced connections.

Recommendations

Route the cable away from power supplies, lighting DMX lines and mains cables to minimize hum and interference. Avoid sharp bends at the connector ends and do not place heavy objects on the cable to prolong service life. For long-term installations, periodically check connector contacts for corrosion and clean with appropriate contact cleaner if required.