Cable de audio XLR (3 pines) 2 x XLR (3 pines) negro Omnitronic 30225204

The Omnitronic 30225204 audio cable is a 1 m black cable with a female XLR (3-pin) connector on one end and two male XLR (3-pin) connectors on the other. It is designed for balanced analog audio connections and reliable signal transfer between microphones, mixers, preamps, and other professional audio equipment. The cable's construction focuses on consistent audio quality and mechanical durability for stage, studio, and live sound applications.

Advantages

This cable provides a stable balanced connection with low noise and minimal interference thanks to its XLR (3-pin) topology. The compact 1 m length reduces excess cable clutter while allowing flexible placement of devices. Robust black outer sheathing and secure connector housings contribute to long service life under frequent use in professional environments. The split termination (female to dual male XLR) simplifies routing from a single source to two inputs without adapters.

Suitable for

Key specifications

How to use

Connect the female XLR end to the microphone or audio source output and plug the two male XLR connectors into the target inputs on a mixer, audio interface, or preamplifier. Ensure connectors are fully seated and latched where applicable. Avoid sharp bends or heavy tension on the cable; route it to minimize mechanical strain and keep it away from strong electromagnetic sources to reduce potential interference. For split signals, verify input sensitivity and phase alignment on the receiving devices to prevent level mismatch or phase cancellation.

Recommendations

For reliable long-term performance, store the cable coiled without tight kinks, inspect connector pins periodically for debris or damage, and avoid pulling the cable by the connectors. Use the 1 m length for close patching and consider longer balanced XLR cables when distance between devices requires it.