Cable de fibra óptica InfiniBand BlueOptics SFP5252FU3MKB 3 m MPO OM4

BlueOptics SFP5252FU3MKB is a 3 m MPO (multi-fiber push-on) trunk cable with MPO/UPC to MPO/UPC connectors (no pins), 12-core multi-mode OM4 (50/125 µm, Type B) and an LSZH (Low Smoke Zero Halogen) jacket. The cable is designed for 850 nm transmission and for connecting networking components on optical lanes, delivering low insertion loss and high return loss. Each cable is compatible with BlueOptics MPO cassettes and intended for high-speed InfiniBand and other data-center interconnects.

Advantages

The BlueOptics SFP5252FU3MKB provides a pre-terminated, compact MPO trunk solution that eliminates splicing and reduces installation time and the need for special tools or extensive staff training. It uses high-quality multimode fibers from reputable manufacturers and branded connectors with zirconia ceramic ferrules to ensure long connector life and reliable performance. Each cable is factory-tested with interferometer and OTDR and shipped with measured insertion loss and return loss values.

Suitable for

Key specifications

How to use

Identify the MPO ports on your transceivers, cassettes or patch panels and align the MPO/UPC connectors according to the keyed orientation. Insert each connector until it latches; no splicing or field assembly is required. Route the trunk cable following standard cabling practices and strain-relief guidelines to avoid tight bends. Verify optical links using the included measurement protocol and test equipment if required.

Recommendations

For best results, maintain recommended bend radii for OM4 multimode fiber, avoid contaminating connector endfaces, and use dust caps when connectors are not mated. Use the supplied test report to confirm insertion loss and return loss values after installation.