Cable de parcheo de fibra óptica dúplex BlueOptics LC-UPC a LC-UPC, multimodo OM4 50/125 µm, 5 m, beige, férula cerámica,

BlueOptics duplex LC‑UPC to LC‑UPC multimode patch cable, 5 m long, OM4 50/125 µm, designed for short‑reach high‑speed networks in data centers and enterprise environments. The cable uses LC‑UPC connectors on both ends with ceramic ferrules and factory‑certified multimode fiber. It is intended for direct patching between switches, transceivers and patch panels and is delivered with a measured test report showing insertion loss values below 0.2 dB.

Advantages

The cable combines OM4 multimode fiber with precision ceramic ferrules to ensure consistent optical alignment and low insertion loss. Its duplex LC‑UPC connector configuration supports polarized multimode links and easy handling in dense rack environments. Supplied with a test report, the product offers documented performance for installation validation and troubleshooting.

Suitable for

Key specifications

How to use

Route the duplex cable through cable management channels and ensure the correct polarity alignment before connecting. Clean connector endfaces with appropriate fiber cleaning tools to maintain low loss. Insert LC connectors fully into device ports until a tactile click is felt. Use the supplied test report to verify measured insertion loss against site acceptance criteria after installation.

Recommendations

Avoid tight bends and excessive pulling during installation; maintain recommended bend radius for multimode fiber and store unused cable neatly on reels or hooks. If connectors become contaminated, clean them before re‑insertion and re‑test insertion loss to confirm performance.