Cable de red SF/UTP Cat.5e negro 7,5 m InLine

The InLine Patch Cable SF/UTP Cat.5e black 7.5m is a Cat.5e twisted-pair Ethernet cable with SF/UTP shielding, designed for connecting network components with RJ45 connectors such as switches, routers, wall sockets, patch panels and network cards. With a length of 7.5 m and a maximum frequency rating of 125 MHz, the cable supports Gigabit Ethernet (1 Gb/s) data transmission.

Advantages

SF/UTP shielding provides improved protection against electromagnetic interference compared with unshielded cables. The 7.5 m length offers flexibility for typical office and rack installations. The black outer jacket gives a neutral appearance and durable construction suitable for permanent and temporary cabling.

Suitable for

• Connecting switches, routers and patch panels
• Linking network interface cards to wall sockets
• Patch cabling in server rooms and office network closets
• Gigabit Ethernet connections up to 1 Gb/s at 125 MHz

Key specifications

• Standard: Cat.5e (twisted pair)
• Shielding: SF/UTP
• Length: 7.5 m
• Colour: Black
• Connectors: RJ45 (both ends)
• Maximum frequency: 125 MHz
• Data rate: up to 1 Gb/s

How to use

Connect the RJ45 plug on each end of the InLine patch cable to the RJ45 ports of the devices you wish to link (for example, a switch and a wall socket or a router and a network card). Ensure connectors are fully inserted and clicks are engaged. Route the cable to avoid sharp bends and sources of strong electromagnetic interference where possible.

Recommendations

For best performance, use the cable for in-building horizontal and patch connections within its specified length and frequency limits. Avoid excessive bending radii, and do not stretch the cable. If routing near high-power electrical equipment, maintain separation or use additional shielding within the installation environment.