Cable de señal EFB Elektronik K2402SW.5

The EFB Elektronik K2402SW.5 is a 5-meter signal cable with male RJ-10 connectors on both ends, designed to provide stable signal transmission between devices with RJ-10 ports. Its construction balances flexibility and durability to suit repeated connection cycles and moderate handling. The cable length gives extended reach while maintaining signal integrity for voice, control and low-speed data applications where RJ-10 interfaces are used.

Advantages

This signal cable offers a reliable mechanical fit with male RJ-10 connectors on both ends and a conductor layout suitable for typical RJ-10 pinouts. The 5 m length reduces the need for intermediate extensions and helps maintain a tidy setup. The jacket material and strain relief at the connector ends improve resistance to bending and wear, while the cable's flexibility makes routing and placement easier in both residential and professional environments.

Suitable for

• Connecting telephony or voice devices that use RJ-10 ports
• Linking control panels, modems or low-speed data devices with RJ-10 interfaces
• Temporary or permanent installations requiring a 5 m RJ-10 patch cable
• Laboratory or service bench use where frequent reconnecting is needed

Key specifications

• Cable length: 5 meters
• Connector type: male RJ-10 on both ends
• Conductor arrangement: standard RJ-10 pinout compatible
• Jacket: flexible protective outer sheath for general-purpose use
• Mechanical features: molded strain relief at connector interfaces

How to use

Insert each male RJ-10 connector into the corresponding RJ-10 port of the devices to be connected. Ensure the connectors click into place to confirm proper engagement. Route the cable to avoid sharp bends and areas of high mechanical stress; use cable clips or ties if needed to secure the run. For disconnection, depress the connector latch and pull straight out to avoid damaging the plug or jack.

Recommendations

Use this cable for voice and low-speed data connections where an RJ-10 interface is specified. Avoid exposure to excessive heat, prolonged UV light or fluids, and do not use the cable in applications requiring shielded or high-frequency signal transmission unless the device documentation confirms compatibility. Periodically inspect connectors and the jacket for wear and replace the cable if damage is observed.