Cable DisplayPort DeLOCK 87048 8K 60Hz 3 m conector macho a conector macho en ángulo de 90° hacia la izquierda

This DisplayPort cable by Delock connects devices with a DisplayPort interface—such as monitors, projectors or televisions—to a PC or laptop. It is 3 m long and features a straight male DisplayPort connector on one end and a 90° left-angled male DisplayPort connector on the other, making it suitable for installations in tight spaces. The cable supports a maximum bandwidth of 32.4 Gb/s and can carry video signals up to 8K Ultra HD (7680 x 4320 @ 60 Hz), 5K (5120 x 2880 @ 120 Hz) and 4K Ultra HD (3840 x 2160 @ 240 Hz). The cable has a 7 mm diameter, triple shielding and a black finish for durability and improved signal and audio transmission.

Advantages

The angled connector simplifies connection behind displays with limited clearance while the 3 m length provides flexibility in device placement. Triple shielding and a robust 7 mm cable diameter reduce interference and help maintain stable high-bandwidth video and audio transfer up to 32.4 Gb/s. Support for high refresh rates and high resolutions ensures compatibility with modern high-resolution monitors and graphics sources.

Suitable for

• Connecting PCs or laptops to high-resolution monitors and TVs
• Setups requiring an angled connector to save space behind displays
• Workstations and home offices that need reliable high-bandwidth video transmission
• Multimedia systems and projectors that support DisplayPort input

Key specifications

• Brand: DELOCK
• Model / MPN: 87048
• EAN: 4043619870486
• Length: 3 m
• Connectors: DisplayPort male to DisplayPort male (one straight, one 90° left angled)
• Maximum bandwidth: 32.4 Gb/s
• Supported resolutions: up to 8K (7680 x 4320 @ 60 Hz), 5K (5120 x 2880 @ 120 Hz), 4K (3840 x 2160 @ 240 Hz)
• Diameter: 7 mm
• Colour: Black

How to use

Connect the straight DisplayPort male connector to the source device (PC or laptop) and the 90° left-angled DisplayPort male connector to the display, projector or TV with a DisplayPort input. Ensure connectors are aligned with the port before insertion. Use the angled end where space behind the display is limited to prevent cable strain. After connecting, select the appropriate display input on the monitor or TV and configure resolution and refresh rate in the operating system or graphics driver settings to match the capabilities of the display.

Recommendations

For best results, route the cable to avoid sharp bends and strong mechanical stress at the connectors. Verify that both source and display support the chosen resolution and refresh rate; update graphics drivers if necessary. Store or route the cable away from strong electromagnetic sources to minimise interference.