Cable DisplayPort DeLOCK 8K 60 Hz 1 m macho recto a macho 90° acodado hacia abajo

This DisplayPort cable by DELOCK connects devices with a DisplayPort interface—such as monitors, projectors or televisions—to a PC or laptop. It has a male straight connector on one end and a male 90° downwards angled connector on the other, a length of 1 m and a cable diameter of 7 mm. The triple-shielded cable supports a maximum bandwidth of 32.4 Gb/s and enables display of up to 8K Ultra HD (7680 x 4320 @ 60 Hz), 5K (5120 x 2880 @ 120 Hz) and 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutions. Audio transmission with a sampling rate up to 1536 kHz is also supported.

Advantages

The DELOCK DisplayPort cable offers high bandwidth for Ultra HD resolutions and low-profile connectivity with a 90° downwards angled male connector for tight installation spaces. Its triple shielding reduces electromagnetic interference for stable video and high-sample-rate audio signals. The 1 m length and black jacket provide a compact, discreet connection between PC or laptop and display device.

Suitable for

• Connecting a PC or laptop to a monitor, TV or projector with DisplayPort input
• Setups requiring 8K @ 60 Hz, 5K @ 120 Hz or 4K @ 240 Hz video output
• Installations with limited space where a downward 90° connector is needed

Key specifications

• Brand: DELOCK
• Model/MPN: 87050
• EAN: 4043619870509
• Connector 1: DisplayPort (male, straight)
• Connector 2: DisplayPort (male, 90° downwards angled)
• Cable length: 1 m
• Cable diameter: 7 mm
• Maximum bandwidth: 32.4 Gb/s
• Supported resolutions: up to 8K (7680 x 4320 @ 60 Hz), 5K (5120 x 2880 @ 120 Hz), 4K (3840 x 2160 @ 240 Hz)
• Audio sampling rate: up to 1536 kHz
• Colour: Black

How to use

Plug the straight DisplayPort male connector into the source device (PC or laptop) and insert the 90° downwards angled DisplayPort male connector into the display device (monitor, TV or projector). Ensure both devices are powered off when connecting or disconnecting to avoid signal issues. After connection, power on the devices and configure the display resolution and refresh rate in the operating system or graphics driver to match the supported modes.

Recommendations

For optimal signal quality keep the cable length appropriate for your setup and avoid tight bends or kinks near the connectors. Use the angled connector where space is constrained and verify display settings to ensure the desired resolution and refresh rate are selected.