Cable Ethernet ProXtend CAT6 RJ-45 3M rojo

The ProXtend CAT6 U/UTP CU LSZH Ethernet Cable (3 m, red) is a high-performance RJ-45 patch cable designed for reliable Gigabit networking in home and office environments. Constructed with 24 AWG, 99.9% pure copper conductors and U/UTP topology, the cable supports 10/100/1000Base-T(X) transmission and is compatible with Power over Ethernet (PoE+). The LSZH outer jacket reduces smoke and toxic emissions in case of fire, while the snagless strain-relief connector design improves durability and ease of installation.

Advantages

High-purity copper conductors and 24 AWG construction deliver stable signal transmission and support Gigabit speeds. The LSZH jacket minimizes hazardous smoke and halogen gases. RJ-45 connectors are plated with 50 µ" gold to increase contact durability and improve transmission quality. Snagless latch protection and reinforced strain relief extend the cable's service life and simplify handling during installation.

Suitable for

• Gigabit Ethernet connections in home networks
• Office network workstations and patch panels
• PoE+ devices such as IP phones, cameras and access points
• Structured cabling where low-smoke, zero-halogen materials are required

Key specifications

• Length: 3 m
• Cable category: CAT6 U/UTP CU
• Conductors: 24 AWG, 99.9% pure copper
• Connector type: RJ-45 to RJ-45
• Connector plating: 50 µ" gold
• Standards: 10/100/1000Base-T(X)
• PoE support: PoE+
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Colour: Red
• Weight: 0.133 kg

How to use

Plug each RJ-45 connector into the corresponding network ports on your devices, switches or patch panels until the latch clicks. Route the cable to avoid tight bends or sharp edges and secure it with cable ties if necessary. For PoE+ devices, ensure the connected switch or injector supports PoE+ and verify power requirements before connecting.

Recommendations

Use this CAT6 cable for short to medium runs up to 3 m to maintain optimal Gigabit performance; avoid installing the cable next to high-voltage power lines to reduce electromagnetic interference.