Cable Ethernet ProXtend Ultra Slim CAT6 RJ-45 4M amarillo

The ProXtend Ultra Slim CAT6 U/UTP CU ethernet cable is a 4 m RJ-45 patch cable designed for gigabit networks. Constructed with 99.9% pure copper strands (AWG 28) and U/UTP topology, the cable supports 10/100/1000Base-T(X) data rates and PoE++ delivery. The outer jacket is made from LSZH (Low Smoke Zero Halogen) material to reduce smoke and toxic fumes in case of fire, and the connector is plated with 50µ"U gold for improved durability and transmission quality.

Advantages

The ultra slim 3.6 mm diameter provides greater flexibility and improves airflow in dense cabling environments. The cable includes strain relief and a tangle-free latch for secure, reliable installation. Gold-plated 50µ"U RJ-45 connectors offer higher throughput and longer life compared with standard connectors. LSZH jacketing minimizes hazardous emissions in enclosed spaces.

Suitable for

• Gigabit Ethernet connections (1000 Mbit/s)
• PoE++ powered devices such as IP cameras and access points
• Tidy installations and cable management in tight spaces
• Office and data center patching where low-smoke materials are required

Key specifications

• Length: 4 m
• Type: CAT6 U/UTP CU
• Conductor: 99.9% pure copper, AWG 28
• Outer jacket: LSZH (Low Smoke Zero Halogen)
• Diameter: 3.6 mm (ultra slim)
• Connectors: RJ-45 to RJ-45, 50µ"U gold plated
• Supported standards: 10/100/1000Base-T(X)
• Color: Yellow

How to use

Plug one RJ-45 connector into your network device (switch, router or network interface) and the other into the corresponding port on the connected device. Route the cable through cable channels or clips as needed; the slim 3.6 mm profile makes it suitable for tight runs and patch panels. Ensure connectors are fully inserted until the latch clicks. For PoE++ applications, confirm that both connected devices support the required power standard.

Recommendations

Use the cable in environments where low-smoke materials are preferred and keep the cable away from high electromagnetic interference sources. For optimal performance in high-density installations, avoid sharp bends and maintain recommended bend radius for CAT6 cables.