Cable HDMI Kindermann Konnect 50 alu 10 m, compatible con 4K 60 Hz

Kindermann Konnect 50 alu 10 m is an HDMI cable engineered to transmit high-definition video and multichannel audio over a fixed 10-metre connection. The cable supports resolutions up to 4K at 60 Hz and is intended for reliable signal transfer between source devices and displays such as monitors, projectors and AV receivers. The aluminium-reinforced outer layer provides improved shielding and mechanical durability for sustained performance in conference rooms, classrooms and home installations.

Advantages

The cable delivers 4K/60 Hz bandwidth capability while maintaining a consistent physical length of 10 m for predictable installation planning. Aluminium reinforcement increases electromagnetic shielding and protects the internal conductors from mechanical stress, reducing the risk of signal degradation over the run. The fixed, single-piece design eliminates connector joins and reduces potential failure points compared with assemblies that use intermediate couplers or extenders.

Suitable for

Key specifications

How to use

Connect one end of the HDMI cable to the HDMI output of the source device and the other end to the HDMI input of the display or AV device. Ensure connectors are fully seated in the ports to establish a secure electrical and mechanical connection. For optimal results, power on the display and source device after making the connection and set the source device output resolution to 3840 × 2160 at 60 Hz if required by the display. Route the cable to avoid sharp bends and pinch points that can damage the internal conductors.

Recommendations

For stable 4K/60 Hz transmission, avoid running the HDMI cable in parallel with heavy-power cables for long distances; if crossing is necessary, do so at a right angle. Inspect connectors periodically for debris and ensure strain relief is applied at connection points in permanent installations.