Cable HDMI MicroConnect HDM191910V1.4FC 10m

The MicroConnect HDM191910V1.4FC HDMI cable is a 10 m High Speed cable compliant with HDMI 1.4. It provides digital transmission of video and audio between source devices and displays, supporting up to 4K@30Hz (3840 x 2160) with HDCP 2.2, 3D, CEC and Audio Return Channel (ARC). Gold-plated connectors and ferrite cores improve signal integrity and reduce interference for stable high-definition playback.

Advantages

This HDMI 1.4 cable supports data rates up to 10.2 Gbps and delivers high-resolution video and multichannel audio over a 10 m length. Gold-plated HDMI Type A connectors ensure reliable contact and reduced signal loss, while built-in ferrite cores help attenuate high- and low-frequency interference between connected video devices. The cable’s black color and standard HDMI Type A-to-A configuration make it compatible with most TVs, monitors and AV receivers.

Suitable for

• Connecting Blu-ray players, set-top boxes or media players to TVs and projectors
• Linking PCs or laptops with HDMI output to monitors and HDTVs
• Home theatre setups requiring ARC and 3D support

Key specifications

• Length: 10 m
• HDMI version: 1.4
• Maximum resolution: 3840 x 2160 (4K) at 30 Hz
• Data rate: up to 10.2 Gbps
• Connectors: HDMI Type A (Standard) to HDMI Type A (Standard)
• Features: HDCP 2.2, 3D, CEC, ARC
• Ferrite cores: yes
• Connector plating: gold-plated
• Color: Black
• Weight: 0.4 kg

How to use

Connect one end of the MicroConnect HDMI cable to the HDMI output on your source device and the other end to the HDMI input on your display or receiver. Ensure both devices are powered on and set to the correct HDMI input. For ARC functionality, connect the cable to the HDMI ARC port on both the TV and the audio device and enable ARC in the device settings if required. Avoid sharp bends and excessive tension along the cable to maintain signal quality.

Recommendations

For reliable 4K@30Hz playback over the 10 m length, use devices and inputs that support HDMI 1.4 or higher and enable HDCP 2.2 where necessary. Keep the cable away from strong electromagnetic sources and route it without tight loops to minimize interference.