Cable SATA DeLOCK 0,5 m 82837

This SATA cable by Delock is compliant with the SATA III standard and supports data transfer rates up to 6 Gb/s. It is intended for internal connections of SATA devices such as hard drives, controller cards or SSDs and is backward compatible with earlier SATA versions, operating at the respective lower speeds when used with older devices. The cable is 0.5 m long and comes in yellow.

Advantages

The Delock SATA cable supports the full 6 Gb/s throughput of SATA III and provides a secure connection thanks to metal locking clips on the SATA connectors. Its 0.5 m length is suitable for typical internal PC routing and the yellow jacket improves visibility inside the case. Backward compatibility ensures interoperability with SATA II and SATA I devices.

Suitable for

• Internal connection of 2.5" and 3.5" HDDs and SSDs
• Connection to SATA controller cards and motherboard SATA ports
• System builds and upgrades inside desktop or server cases

Key specifications

• Standard: SATA III (6 Gb/s), backward compatible with SATA II/I
• Data transfer rate: up to 6 Gb/s
• Length: 0.5 m
• Connector: SATA male to SATA male with metal locking clips
• Colour: Yellow
• Brand: DELOCK, MPN: 82837, EAN: 4043619828371

How to use

Connect one SATA connector to the SATA port on the motherboard or controller card and the other connector to the SATA device (HDD, SSD). Ensure the metal clips click into place for a secure connection. Route the cable inside the case to avoid interference with fans or other components and connect the device to power using a separate SATA power cable from the PSU.

Recommendations

For optimal performance, use this cable for internal SATA III connections up to 6 Gb/s and avoid excessive bending or kinking. When installing multiple drives, keep cables tidy to maintain airflow and check that connectors are fully seated before powering the system.