Cable SATA DeLOCK 84986 0,7 m SATA 7-pin negro azul

This SATA cable by Delock is a 0.7 m internal data cable with SATA 7-pin connectors on both ends. It supports the SATA III standard with data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions. The cable is finished in black and blue and is intended for reliable internal connection of SATA devices such as hard drives, controller cards or flash storage.

Advantages

The Delock 84986 cable supports SATA III speeds up to 6 Gb/s and is backwards compatible with earlier SATA standards. Metal clip latches on the connectors provide a secure, audible click when connected. The 0.7 m length allows flexible routing inside PC cases and the black-and-blue exterior improves visual identification and integration into system builds.

Suitable for

• Connecting internal HDDs and SSDs to motherboard or controller cards
• Linking SATA controller cards to storage devices
• Replacing or upgrading existing internal SATA cables in desktop PCs

Key specifications

• Cable type: SATA III
• Cable length: 0.7 m
• Connector 1: SATA 7-pin
• Connector 2: SATA 7-pin
• Data transfer rate: up to 6 Gb/s
• Product colour: Black, Blue

How to use

Route the SATA cable inside the computer case from the motherboard or controller card to the storage device. Align the 7-pin connector with the device's SATA port and press until the metal clip latches with an audible click; when connected to a hard drive the cable will be led to the left. Ensure both ends are fully seated before powering the system.

Recommendations

For optimal performance, use this SATA III cable with compatible SATA III devices and ports. If connected to earlier SATA versions, the transfer speed will be limited to the older standard. Keep the cable clear of sharp edges and fans to avoid physical damage.