Cable SATA DeLOCK 84995 0,2 m SATA 7 pines negro azul

This SATA cable by DELOCK (model 84995) is a 0.2 m internal SATA III cable with SATA 7-pin connectors on both ends in a black and blue design. It enables connection of SATA devices such as HDDs, SSDs, controller cards or flash storage to a motherboard or controller and supports data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions.

Advantages

The cable supports SATA III speeds (up to 6 Gb/s) and is backwards compatible with previous SATA standards. Both ends use standard 7-pin SATA connectors with metal clips to lock the connection securely. Its compact 0.2 m length reduces cable clutter inside the case and the black-and-blue colouring helps easy identification during installation.

Suitable for

• Connecting internal HDDs
• Connecting internal SSDs
• Linking SATA controller cards to drives
• Internal flash storage modules that use SATA interface

Key specifications

• Cable type: SATA III (backwards compatible)
• Cable length: 0.2 m
• Connectors: SATA 7-pin to SATA 7-pin
• Data transfer rate: up to 6 Gb/s
• Product colour: Black, Blue
• Manufacturer: DELOCK, MPN 84995

How to use

Power off the computer and open the case. Route the cable to avoid sharp bends; when connecting to a HDD the cable will typically be led upwards. Align each 7-pin SATA connector with the device and motherboard or controller port and press until the metal clip clicks to secure the connection. Close the case and power on the system to verify device detection in BIOS/OS.

Recommendations

Use this short 0.2 m cable for neat internal routing in compact cases or when drive and controller ports are close together. Avoid excessive bending or pulling on the cable and ensure connectors are fully seated to maintain reliable 6 Gb/s performance.