Cable SATA DeLOCK 85231 0,3 m SATA 7 pines + Molex 4 pines

The DeLOCK 85231 SATA cable (0.3 m) allows connection of a device with a 22‑pin SATA interface using an available SATA 7‑pin port and a free 4‑pin Molex power connector on the power supply. The cable supports SATA III data transfer and has metal clips on the SATA receptacles to ensure a secure, click‑in connection. Its short length makes it suitable for compact PC cases and tight internal layouts.

Advantages

Compact 0.3 m length suitable for limited space installations, support for SATA III for reliable data transfer, integrated 4‑pin Molex power connector for direct power supply to the drive, and metal locking clips on the SATA connectors for stable, vibration‑resistant connections.

Suitable for

• Connecting 22‑pin SATA drives inside desktop PCs
• Use in small form‑factor or compact PC cases
• Replacing a damaged internal SATA-to-Molex cable

Key specifications

• Cable type: SATA III
• Cable length: 0.3 m
• Connector 1: SATA 7‑pin + Molex 4‑pin
• Connector 2: SATA 22‑pin
• Colour: Black
• Brand: DELOCK, MPN: 85231, EAN: 4043619852314

How to use

Connect the SATA 7‑pin plug to the motherboard or SATA controller port and secure it until the metal clip clicks. Plug the 22‑pin end into the device’s SATA interface. Connect the 4‑pin Molex connector to an available Molex power socket on the power supply to provide power to the drive. Ensure connectors are aligned correctly before applying force.

Recommendations

Before installation, power off the PC and disconnect it from the mains. Route the cable to avoid sharp bends and contact with moving parts. If the Molex power connector or SATA contacts show damage or corrosion, replace the cable before use.