Cable USB ACT USB 2.0 conector A - conector B 5,00 m

The ACT USB 2.0 A male to USB B male cable is a 5.00 m black USB 2.0 connection cable designed to connect devices with Type A and Type B ports. It supports High Speed USB 2.0 data transfer with a maximum rate of 0.48 Gbit/s and is certified for USB 2.0 compliance.

Advantages

This certified USB 2.0 cable provides a reliable wired connection between host devices and peripherals. With male Type A and male Type B connectors and a 5.00 m length, it enables flexible placement of printers, scanners and other USB B devices while maintaining the USB 2.0 High Speed transfer rate. The black jacket offers a neutral appearance and standard durability for everyday use.

Suitable for

• Connecting printers to computers
• Connecting scanners to computers
• Linking USB B-equipped audio interfaces or external devices to a host
• General data transfer between USB A hosts and USB B peripherals

Key specifications

• Connector 1: USB A (male)
• Connector 2: USB B (male)
• USB version: USB 2.0 (High Speed)
• Maximum data transfer rate: 0.48 Gbit/s
• Cable length: 5.00 m
• Colour: Black
• Brand: ACT
• MPN: SB2405
• EAN: 8716065188899

How to use

Connect the USB A male end to the host computer or other USB A port and plug the USB B male end into the peripheral device such as a printer or scanner. Ensure both devices are powered on and, if necessary, install any required drivers on the host system. Avoid sharp bends and excessive tension along the cable to maintain signal integrity.

Recommendations

For best performance, use this USB 2.0 cable for connections within typical desktop distances; if higher transfer rates or longer active cabling are required, consider USB 3.x or active/repeater solutions. Keep the cable away from strong electromagnetic sources to reduce interference.