Soporte de pared para TV con movimiento completo ACT AC8357 para pantallas de 43 inch a 90 inch, VESA 100x200 – 600x400, inclinación -15° – 3°, giro ±30°, carga máx. 50 kg, ultraplano

The AC8357 full motion TV wall mount is designed for TVs up to 90 inches and 50kg. This ultra-slim wall mount combines design and flexibility, allowing you to place the TV just 1.95cm from the wall or pull-out the bracket so the TV comes 25cm from the wall. Set your preferred viewing position by tilting or swiveling the TV. The AC8357 comes with everything that you need for an easy installation: drilling guide, bubble level and mounting material.

Ultra-slim wall mount: a stylish TV mounting solution
The AC8357 full motion wall mount is designed to hold TVs up to 90 inches and 50kg. Place the television close to the wall (1.95cm) for a sleek look or pull-out the wall bracket (25cm) into the room for more convenience.

Set the optimal viewing angle
Adjust the viewing position of the TV to your preferences by tilting the television up or down and swiveling it left or right. This range of motion helps you to find the perfect angle to reduce glare and reflections on the television screen.
Switch easily between different seating positions while keeping a good view on the TV.

Easy and convenient installation
The AC8357 full motion TV wall mount comes as a complete package that includes a drilling guide, bubble level and all necessary mounting material.

Install the bracket to the wall using the provided drilling guide and bubble level for more convenience, then mount the VESA plates to your TV and hang the television in the wall mount.

Use the cover strips to hide the screws, for a clean look.

ACT Full motion TV Wall Mount, 43" up to 90", ultra slim, VESA. Maximum weight capacity: 50 kg, Minimum screen size: 109.2 cm (43"), Maximum screen size: 2.29 m (90"), Minimum VESA mount: 100 x 200 mm, Maximum VESA mount: 600 x 400 mm. Tilt angle range: 3 - -15°, Swivel angle range: 30 - -30°, Angle of rotation: 60°, Distance to the wall (min): 1.95 cm, Distance to the wall (max): 25 cm. Product colour: Black

How to use

Install the mounting bracket to a suitable load-bearing wall using the provided drilling guide and bubble level. Attach the VESA plates to the back of your TV following the supported VESA pattern, then hang the TV on the wall bracket and secure it. Adjust the arm to the desired distance from the wall and set the tilt and swivel to achieve the preferred viewing angle. Use the included cover strips to conceal screws for a neat appearance.

Recommendations

For safe and stable installation, mount the bracket into wall studs or appropriate anchors for your wall type. When adjusting tilt or swivel, check that cables have sufficient slack and do not strain connectors. Periodically verify fasteners remain tight, especially after adjusting the arm position.