Caja para PC Thermaltake View 380 XL TG ARGB Midi Tower Blanco

View 380 XL TG ARGB Snow Mid Tower Chassis is a dual-chamber ATX case designed for modern builds, offering support for Hidden-Connector motherboards and room for up to a 360mm radiator at the top and the motherboard side. The case includes tempered glass front and left panels, a recessed bottom compartment, front I/O ports with USB-C, and a built-in GPU holder. Four pre-installed 120mm Hydraulic Bearing ARGB Lite fans provide factory cooling and addressable RGB lighting compatible with major motherboard software.

Advantages

The dual-chamber layout increases build space and improves cable management and airflow. Compatibility with Hidden-Connector motherboards from ASUS, MSI and GIGABYTE allows use with next-generation boards. Tempered glass panels give clear visibility of internal components while the built-in GPU holder prevents card sag. Flexible radiator and fan support enables varied cooling configurations and up to ten 120mm fans can be installed for expanded cooling performance.

Key specifications

• Form factor: Mid tower, dual-chamber ATX
• Motherboard compatibility: Standard ATX and Hidden-Connector motherboards (ASUS, MSI, GIGABYTE)
• Pre-installed fans: Four 120mm Hydraulic Bearing ARGB Lite fans (three on motherboard side, one rear)
• Maximum fans supported: Up to ten 120mm fans
• Radiator support: Up to 360mm at top and motherboard side
• CPU cooler max height: 160 mm
• GPU max length: 420 mm
• PSU max length: 180 mm
• Storage: Up to three 2.5" SSDs or one 3.5" HDD
• Front/Bottom I/O: 2× USB 3.0, 1× USB 3.2 Gen2 Type-C, 1× HD Audio
• Panels: Tempered glass front and left
• ARGB support: 5V addressable RGB header; compatible with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome

How to use

Install the motherboard according to the case standoffs and ensure compatibility if using a Hidden-Connector board. Mount the power supply in the recessed bottom compartment and route cables through the dual-chamber layout for neat cable management. Place drives in the available 2.5" or 3.5" bays. Install the GPU and secure it with the built-in GPU holder to prevent sag. Fit radiators up to 360mm at the top or motherboard side as required and verify clearance for the CPU cooler (max 160 mm) and GPU length (max 420 mm). Connect the ARGB header to a 5V addressable RGB header on a compatible motherboard to control lighting via supported motherboard software.

Recommendations

For optimal cooling and clean cable management, plan component placement before assembly: use the dual-chamber routing to separate power and data cables, install the four pre-installed ARGB Lite fans as intake/exhaust according to your radiator layout, and connect the 5V ARGB header to compatible motherboard software for unified lighting control.