Cámara de vigilancia IP Bullet Hikvision Pro Series DS-2CD2T63G2-2LI (2,8 mm) Exterior, 3200×1800, 30 fps, 105° horiz, 76 m detección

Hikvision Pro Series IP bullet camera DS-2CD2T63G2-2LI delivers 3200×1800 (6 MP) video at 30 fps from a 1/2.4" CMOS sensor and a 2.8 mm fixed lens with a 105° horizontal field of view. Designed for outdoor ceiling or wall mounting, the white weatherproof housing and robust mechanical design support continuous wired Ethernet connectivity and long-range detection. Built-in AcuSense analytics separates human and vehicle targets, while Smart Hybrid Light combines IR and white light for clear images in low light and variable lighting conditions. This model offers up to 76 m detection range, 30 m observation and 15 m recognition distances, plus on-board video motion detection and audio support for enhanced situational awareness.

Advantages

The camera provides high-resolution imaging with efficient H.265+ compression to reduce bandwidth and storage needs while maintaining image detail. True WDR (120 dB) improves visibility in scenes with strong backlight. AcuSense deep-learning classification reduces false alerts by focusing on human and vehicle targets. Smart Hybrid Light and integrated dual microphones improve image and audio capture in low-light conditions. The IP67-rated housing and sturdy build support outdoor installation and reliable operation in challenging environments.

Suitable for

• Perimeter and parking lot surveillance
• Building entrances and access control points
• Retail exteriors and loading docks
• Public spaces, streets and campus monitoring

Key specifications

• Image sensor: 1/2.4" CMOS, 6 MP (3200×1800)
• Frame rate: 30 fps
• Lens: 2.8 mm fixed, horizontal FoV 105°, vertical FoV 55°
• Detection / observation / recognition ranges: up to 76 m / 30 m / 15 m
• Compression: H.265+ (efficient video encoding)
• Wide dynamic range: 120 dB true WDR
• Low-light support: Smart Hybrid Light (IR + white light), night vision up to 60 m
• Analytics: AcuSense human and vehicle classification, video motion detection
• Audio: Built-in arrayed dual microphones for two-way or on-site audio capture
• Connectivity: Wired Ethernet (PoE compatible when supported by system)
• Mounting: Ceiling or wall mounting; 360° adjustable rotation for aiming
• Weather resistance: Outdoor-rated housing (dust and water protection)
• Color: White; Weight: 1.15 kg

How to use

Mount the camera on a sturdy ceiling or wall surface using appropriate anchors and ensure the lens has a clear field of view. Connect to a PoE-enabled switch or provide separate power and wired Ethernet according to your network design. Configure resolution, frame rate and H.265+ encoding in the recorder or camera web interface to balance image quality and storage. Enable AcuSense classification and set detection/alert zones to focus on relevant areas and reduce false alarms. Adjust Smart Hybrid Light modes for the installation to optimize illumination at night.

Recommendations

For reliable long-term operation, install at a height and angle that match the specified detection and recognition ranges: use higher mounts for broader detection and lower mounts for closer observation and identification. Regularly update firmware, test analytics settings after installation, and perform periodic cleaning of the optical window to maintain image clarity.