Cámara de vigilancia IP Nedis SIMCBO50WT

The Nedis SIMCBO50WT is a rechargeable Full HD outdoor pan-tilt security camera with 4G LTE support, designed for monitoring locations without reliable Wi‑Fi or mains power. It features a waterproof IP65 housing, pan range up to 350° and tilt up to 70° for wide coverage, a 120° field of view and 1920×1080 resolution. The camera records to microSD (up to 128 GB) and can optionally store video in the cloud via the Nedis SmartLife app. It can run on its internal battery and be recharged by the included solar panel.

Advantages

The camera combines cellular 4G connectivity with a rechargeable battery and solar charging for installation where Wi‑Fi or mains power are unavailable. Its IP65-rated housing allows outdoor mounting, while Full HD resolution, pan/tilt movement and AI human motion detection provide clear images and reduce false alerts. Built-in spotlight, enhanced IR LEDs and colour night vision extend visibility to about 10 m, and two‑way audio with noise cancellation plus an alarm/siren enable communication and deterrence.

Suitable for

• Remote houses and country properties
• Construction sites and temporary installations
• Monitoring outdoor entrances, driveways and gardens
• Locations without reliable Wi‑Fi or mains power

Key specifications

• Model: Nedis SIMCBO50WT (MPN: SIMCBO50WT, EAN: 5412810418848)
• Image sensor: CMOS, resolution 1920×1080 (Full HD)
• Lens: 3.2 mm, field of view 120°
• Pan: up to 350°, Tilt: up to 70° (tilt range 0–75° per manufacturer summary)
• Connectivity: 4G LTE cellular; Nedis SmartLife app
• Storage: microSD up to 128 GB (card not included); optional cloud (subscription)
• Night vision: colour night vision with 4 enhanced IR LEDs and 4 spotlights, range approx. 10 m
• Power: rechargeable battery; solar panel included
• Housing: IP65 weatherproof
• Audio: microphone and speaker with noise cancellation; two‑way audio; alarm/siren

How to use

Install the camera on a wall, ceiling, pole or tree using the supplied mount or strap, and attach the external antenna to improve 4G reception. Insert a microSD card if local recording is desired and charge the internal battery before first use. Set up the device in the Nedis SmartLife app, follow the in‑app steps to register the camera and configure 4G connection or cloud service, and adjust pan/tilt, motion detection sensitivity and notification preferences.

Recommendations

For best results, mount the camera where the solar panel receives direct sunlight and the external antenna has clear line of sight to cellular signal. Adjust AI human motion detection to limit false alarms from animals or moving vegetation and test night-vision and spotlight settings after installation.