Cámara Hikvision Smart Hybrid Light DS-2CD2687G3-LIZSY 8 MP ColorVu objetivo varifocal motorizado 2,8–12 mm

Hikvision Smart Hybrid Light Camera DS-2CD2687G3-LIZSY 8 MP ColorVu Motorized Varifocal 2.8–12 mm is an 8-megapixel network surveillance camera with a motorized 2.8–12 mm varifocal lens and ColorVu technology for continuous color imaging in low-light conditions. The camera integrates smart hybrid illumination that combines white light and warm light sources to improve scene visibility and identification while maintaining natural color rendition. Compact and weather-resistant, the camera supports flexible field-of-view adjustment and is designed for both indoor and outdoor monitoring of entrances, perimeters, parking areas and building facades.

Advantages

The camera delivers high-resolution 8 MP imaging with a motorized varifocal lens, allowing remote adjustment of focal length between 2.8 and 12 mm for precise framing. ColorVu imaging and hybrid light functionality provide clear, color video in low illumination without relying solely on infrared, improving subject identification and evidence capture. The device supports intelligent features and event-triggered illumination for targeted lighting when motion or analytics are detected. Rugged housing and weather resistance enable reliable operation in typical outdoor environments.

Suitable for

• Outdoor perimeter and entrance surveillance
• Parking lots and driveways
• Commercial building façades and loading zones
• Indoor monitoring of lobbies, corridors and retail areas

Key specifications

• Image sensor: 8 MP high-resolution sensor for detailed video
• Lens: Motorized varifocal lens, 2.8–12 mm adjustable focal length
• Low-light performance: ColorVu technology and hybrid illumination for continuous color images at low lux levels
• Video output: Network IP streaming compatible with common surveillance platforms and ONVIF
• Environmental protection: Weather-resistant housing suitable for outdoor installation
• Remote control: Motorized zoom and focus adjustment via network interface

How to use

Install the camera at a suitable mounting point with a clear view of the monitored area and provide power and network connectivity according to installation best practices. Use the camera's motorized varifocal control through the recorder or network management software to set the desired 2.8–12 mm focal length and fine-tune focus for sharp images. Configure illumination and smart event settings so that hybrid lights activate on motion or analytic triggers to enhance detail capture during low-light events. Verify video encoding, frame rate and storage settings on the recording device to balance image quality and storage capacity.

Recommendations

Position the camera to minimise backlighting and obstructions; use the motorized zoom to frame critical areas such as entrances or license plate capture zones. Calibrate smart illumination thresholds to avoid unnecessary activations while ensuring illumination during relevant events. Regularly check lens cleanliness and housing seals to maintain image quality and weather resistance.