Controlador de tira LED EUROLITE LC-1 RGB (Modelo 50530555) para tiras LED RGB

EUROLITE LC-1 RGB is an LED strip controller designed to manage RGB LED strips, providing color mixing and a range of lighting modes for ambient, decorative or stage applications. The controller allows centralized control of RGB strips and is intended to work with compatible 12–24V LED strip systems and suitable power supplies. Its compact design supports straightforward integration into installations that require simple color selection and effect switching.

Advantages

The controller provides precise control over red, green and blue channels to produce a wide palette of colors and smooth transitions between modes. It supports multiple preset effects and manual adjustments for static or dynamic lighting. Installation and wiring follow common RGB strip conventions, making the device compatible with many standard RGB strips and LED drivers. The unit’s low-profile housing and external connectors enable tidy mounting in cabinets, behind displays or inside small enclosures.

Suitable for

Key specifications

How to use

Connect the controller between a compatible low-voltage LED power supply and the RGB LED strip following the polarity and channel markings on the connectors. Power the system only after all connections are secured. Use the controller’s interface to select preset effects, adjust individual channel levels or set static colors. For initial setup, start with low brightness and increase gradually to achieve the desired color balance. Ensure the power supply is sized to handle the combined current draw of the connected LED strips.

Recommendations

Use the controller with LED strips and power supplies that match the voltage and current requirements of your installation. Avoid exposing the controller to moisture or excessive heat; install it in a ventilated, dry location. For extended runs or high-power strips, place power injections at intervals and verify cable thickness to minimize voltage drop. When integrating into permanent installations, secure connections with appropriate connectors or soldering and use strain relief for cables.