Controlador DMX para tira LED EUROLITE 50531100 RGBW de 4 canales para control de iluminación direccionable

EUROLITE 50531100 is a 4-channel DMX controller designed to operate RGBW LED strips from a DMX lighting console or controller. The device translates incoming DMX signals into independent control of four channels — red, green, blue and white — allowing precise color mixing and dynamic effects for stage, architectural, or event installations. The compact unit is intended for integration into DMX-managed systems to centralize control of LED strip installations and to simplify wiring and programming.

Advantages

The controller provides four independent channels for accurate RGBW color reproduction and smooth dimming. It accepts standard DMX input for compatibility with lighting desks and shows, enabling synchronized control across multiple fixtures. Its straightforward signal mapping reduces setup time, and the device supports common wiring arrangements for LED strips, helping to minimize cabling complexity. The design focuses on reliable signal conversion and stable output suitable for continuous use in professional installations.

Suitable for

Key specifications

How to use

Install the controller in a suitable enclosure or location close to the LED strip runs and the DMX source. Connect the DMX feed from your lighting console to the controller input using standard DMX cabling and ensure proper termination where required. Wire the LED strip outputs to the corresponding R, G, B and W terminals on the controller, following polarity and voltage specifications of the LED strips. Address the device in the DMX universe according to your controller’s channel plan, typically assigning four consecutive channels per controlled RGBW strip section. Use your lighting console to set intensity, color and effects by adjusting the assigned DMX channels.

Recommendations

Verify that LED strip voltage and current ratings match the controller’s output capabilities before connection. Use recommended DMX cabling and termination to avoid signal errors. For longer cable runs, consider local power injection to prevent voltage drop and maintain consistent color and brightness. Regularly inspect connectors and wiring in professional installations to ensure reliable operation.