Corsair Vengeance - DDR4 - Módulo - 16 GB - SO DIMM 260-PIN

Corsair Vengeance DDR4 16 GB 2666 MHz is a 260-pin SO-DIMM memory module designed for laptops and notebooks. It offers 16 GB capacity, DDR4 technology, a clock speed of 2666 MHz and CAS latency 18, providing improved multitasking and responsiveness for demanding applications. The module operates at 1.2 V and is compatible with systems that support DDR4 SODIMM memory.

Advantages

The Vengeance module uses ICs selected for performance potential and is engineered for reliability on modern Intel-based systems. It supports automatic overclocking so many laptops will apply the highest stable settings without manual configuration. Installation is plug-and-play: install the SO-DIMM and the system will detect the higher speed where supported.

Suitable for

• Upgrading laptop or notebook memory to 16 GB
• Improving multitasking and application responsiveness
• Systems that require 260-pin DDR4 SO-DIMM modules
• Users seeking a single-module upgrade (16 GB)

Key specifications

• Capacity: 16 GB
• Type: DDR4 SO-DIMM (260-pin)
• Speed: 2666 MHz
• CAS Latency: 18
• Voltage: 1.2 V
• Manufacturer: CORSAIR, MPN: CMSX16GX4M1A2666C18, EAN: 843591077187

How to use

Power off the laptop and disconnect all power sources. Open the memory compartment according to the laptop manufacturer’s instructions, remove the existing module if necessary, and align the notch of the 260-pin SO-DIMM with the slot. Insert the module at the correct angle and press down until the retaining clips lock it in place. Reassemble the laptop and power it on. The system BIOS/UEFI should detect the new DDR4 module and apply appropriate timings and frequency, including automatic overclocking where supported.

Recommendations

Check your laptop’s documentation to confirm support for DDR4 260-pin SO-DIMM modules and maximum supported memory per slot. If the system does not recognize the 2666 MHz speed, verify BIOS/UEFI settings or consult the laptop manufacturer for compatibility details.