Cuchilla de corte FEIN 63502106210 para latón plástico madera 8,5 cm

FEIN 63502106210 HSS saw blade attachment for oscillating tools, diameter 8.5 cm, designed for cutting sheet metal up to approximately 1/16 in as well as plastics, glass-fibre reinforced plastic (GFRP), wood, glazing compound, brass and bronze. The solid HSS tooth design provides high cutting speed with a clean, narrow kerf. The segmented shape allows precise work in corners and along edges without overcut.

Advantages

The solid high-speed steel (HSS) construction ensures long life and consistent cutting performance. Metal-specific toothing produces controlled cuts in thin sheet metal while remaining effective on non-metal materials listed above. The segmented geometry facilitates access to tight spots and enables plunge cuts and edge work with minimal material loss and reduced risk of overcut.

Suitable for

• Cutting thin sheet metal (up to approx. 1/16 in)
• Working with plastics and GFRP
• Trimming and cutting wood and glazing compound
• Cutting non-ferrous metals such as brass and bronze

Key specifications

• Brand: FEIN
• Manufacturer part number (MPN): 63502106210
• EAN: 4014586389462
• Diameter: 8.5 cm
• Material: HSS (high-speed steel)
• Suitable materials: sheet metal (up to approx. 1/16 in), plastics, GFRP, wood, glazing compound, brass, bronze

How to use

Fit the cutter to a compatible FEIN or universal oscillating multi-tool according to the tool manufacturer’s mounting instructions. Secure the blade before operation. Use steady, controlled oscillation speed appropriate for the material being cut and apply light feed pressure—allow the HSS teeth to cut without forcing. For plunge cuts, start at a lower speed and increase if necessary. Keep the workpiece clamped and wear appropriate personal protective equipment.

Recommendations

For best results, select oscillation speed and feed rate to suit the material: lower speeds for metals and GFRP, medium speeds for plastics and glazing compound, and higher speeds for wood. Regularly inspect the blade for wear and replace when cutting performance or edge quality degrades.