DeLOCK Riser Card PCI Express x1 a 2 x PCI 32 Bit Slot 60 cm cable

The DeLOCK Riser Card PCI Express x1 to 2 x PCI 32 Bit with a 60 cm cable lets you expand a single PCIe x1 slot into two legacy 32-bit PCI slots. The flexible cable and internal design enable space-saving installation inside a computer case and provide compatibility with systems that require additional PCI cards.

Advantages

This riser card converts one PCI Express x1 host interface to two PCI 32-bit output slots using a 60 cm flexible cable, allowing you to install older PCI cards where motherboard space or slot layout is limited. It is an internal adapter designed for compatibility with Windows 10, Windows 8.1 and Windows Server 2019, and supports common PCI add-in cards without requiring external connections.

Suitable for

Key specifications

How to use

Install the riser card by connecting the PCIe x1 connector to the motherboard’s corresponding slot, then mount the two PCI cards into the PCI slots on the riser. Route and secure the 60 cm flexible cable inside the case to avoid interference with fans or other components. Ensure the system is powered off and grounded during installation and verify that both the motherboard BIOS and the operating system recognize the additional PCI cards after powering on.

Recommendations

Use this adapter for internal expansion only; check physical space and airflow before installation. Confirm driver availability for each PCI card and avoid placing heavy or tall cards in positions that may stress the riser cable or connectors.