EnGenius Fit6 2x2 Lite punto de acceso Wi-Fi interior gestionado dual band 11ax 574+2400Mbit/s 2T2R GbE PoE.af 4x3dBi interno

The EnGenius Fit6 2x2 Lite Managed Indoor Wireless Access Point is a dual-band device supporting 2.4 GHz and 5 GHz frequencies with a maximum theoretical data rate of 574 Mbps on 2.4 GHz and up to 2400 Mbps on 5 GHz. It implements 802.11ax (Wi‑Fi 6) and is secured with WPA3 and WPA2‑PSK AES encryption. The access point includes a single Gigabit Ethernet (10/100/1000 Mbps) LAN port and supports Power over Ethernet (PoE) for flexible installation. Its compact white housing and 0.38 kg weight make it suitable for indoor deployments where efficient, managed Wi‑Fi is required.

Advantages

The EnGenius Fit6 delivers improved spectral efficiency and higher throughput thanks to 802.11ax technology, while WPA3 and WPA2‑PSK AES provide enhanced wireless security. Gigabit Ethernet and PoE support simplify cabling and deployment, and the low maximum power consumption (12.8 W) reduces operating costs. The unit’s managed features allow central configuration and monitoring in multi‑AP environments.

Suitable for

• Small offices and meeting rooms
• Retail stores and boutique environments
• Residential multi‑room Wi‑Fi with managed control
• Hospitality common areas (lobbies, lounges)

Key specifications

• Wireless standards: IEEE 802.11ax/ac/n/a/b/g
• Maximum data transfer rate: 2400 Mbit/s (combined)
• Radio: Dual‑band 2.4 GHz (574 Mbps) and 5 GHz (2400 Mbps)
• Ethernet LAN ports: 1 × RJ‑45 (10/100/1000 Mbps)
• Security: WPA3, WPA2‑PSK AES
• Power: Power over Ethernet (PoE) support; max consumption 12.8 W
• Colour: White; Weight: 0.38 kg

How to use

Mount the access point in a central indoor location and connect it to a PoE‑capable switch or PoE injector via the Gigabit Ethernet port to supply power and network connectivity. Use the EnGenius Fit management interface or supported controller to adopt, configure SSIDs, apply security settings (WPA3/WPA2‑PSK AES) and assign VLANs or QoS policies as needed. Rebooting and firmware updates are performed through the management portal.

Recommendations

For best coverage and performance, place the access point at ceiling height or high on a wall away from large metal objects and other sources of RF interference. Use a managed PoE switch to provide stable power and enable centralized monitoring when deploying multiple units.